Unique Frrameless Shower Doors

Unique Frrameless Shower Doors
Product Details

Quick Details:

  • Model Number: 625

  • Tray Material: ABS

  • Type: Shower Enclosures, Modern

  • Appearance Style: Neo-Angle

  • Frame Style: With Frame

  • Frame Material: Aluminium Alloy

  • Frame Surface Finishing: Polished

  • Glass Thickness: 8mm

  • Open Style: Hinge

  • Tray Shape: Neo-Angle

  • Certificates: CE/ROHS/SGS/ISO

Model

C614

 Size

900*900*1930mm;1000*1000*1930mm.

Glass

8mm clear glass

Frame

Chrome shinning aluminum alloy.

 

configuration

Two pieces of fixed glass and one pivot door.

15 cm height ABS tray.

Other accessories:water bar,door handles and so on.

Optional

Pattern of glass,Transparent,Matt,Grey,Blue is available.  

Satin or painted aluminum.

other accessories.

Payment Terms

A. 30% T/T in advance, the balance against B/L copy.

B. L/C acceptable for total amount above Ten thousand US dollars. 

OEM

 Available

 Delivery Time

 Within 20-30 days after receiving the deposit.

 Packing

 Inside:Air bubble foam;Outside:5 layer high strength exporting carton box

 MOQ

 10 units,we also accept test order.

 

  volume

 900*900*1930mm:  0.271 CBM/set. 98 sets/20'GP; 200 sets/40'GP,250 sets/40'HQ;

 1000*1000*1930mm:  0.293 CBM/set. 88 sets/20'GP, 184 sets/40'GP, 232 sets/40'HQ;

  

Our pofessional aluminum cutting machine can make the aluminum cutting surface neat, smooth and no skew to ensure the high quality.

Traditional cutting machine is coarse the aluminum surface is skew and rough, so the quality would be declining.

We strictly control the quality of the products pay much attention to small accessory.The wheels with brass core has longer time to use.

Common accessory would easily broken, the glass would rock and fall down, so the quality of small accessory can't be ignored.

Our packaging is intact and strict, one piece of glass with 2 layers of bubble foam besides with foam around the glasses to avoid the glass damage.

Some factories's packaging is coarse and not strict, they use only a little of foam to save cost.The glass would be easily broken.

We have 2 professional QC, they are responsible and carefully for each unit of raw material and finished product to ensure the good qulity of product when customer received.

A factory without QC can not control the quality which will cause serious problem. 

    

 

Technical Specification

1) Requirements of Glass:
1. Tempered glass should be consistent with national safety CCC
standards and CE standards.
2. Impact resistance/Fragmented State should be required GB
15763.2-2005 of agreement. 
3. Appearance requirements should to be met national safety
standards.
4. The Grain number of each 50 * 50mm area should to reach 45
Grains or more.

2) Requirements of apperance:
1. The Product frame decorative surface should no cracks, pitting,
bubbles and oxide film shedding
2. The Product frame decorative surface should no burrs, flaw.

3) Requirements of construction and assembly quality :
1. Each connecting piece should to be solid, no loose.
2. Accessory should no defect and must be fixed with products.
3.The hose and inlet should no leaks.
4. Each accessory should to be complied with the requirements of
environmental protection, no UV ozone and other hazardous substances.

Feedback