New Condition Aluminium Frameless Tempered Glass Bypass Shower Door
Model Number: 625
Tray Material: ABS
Type: Shower Enclosures, Modern
Appearance Style: Neo-Angle
Frame Style: With Frame
Frame Material: Aluminium Alloy
Frame Surface Finishing: Polished
Glass Thickness: 8mm
Open Style: Hinge
Tray Shape: Neo-Angle
8mm clear glass
Chrome shinning aluminum alloy.
Two pieces of fixed glass and one pivot door.
15 cm height ABS tray.
Other accessories:water bar,door handles and so on.
Pattern of glass,Transparent,Matt,Grey,Blue is available.
Satin or painted aluminum.
A. 30% T/T in advance, the balance against B/L copy.
B. L/C acceptable for total amount above Ten thousand US dollars.
Within 20-30 days after receiving the deposit.
Inside:Air bubble foam;Outside:5 layer high strength exporting carton box
10 units,we also accept test order.
900*900*1930mm: 0.271 CBM/set. 98 sets/20'GP; 200 sets/40'GP,250 sets/40'HQ;
1000*1000*1930mm: 0.293 CBM/set. 88 sets/20'GP, 184 sets/40'GP, 232 sets/40'HQ;
Our pofessional aluminum cutting machine can make the aluminum cutting surface neat, smooth and no skew to ensure the high quality.
Traditional cutting machine is coarse the aluminum surface is skew and rough, so the quality would be declining.
We strictly control the quality of the products pay much attention to small accessory.The wheels with brass core has longer time to use.
Common accessory would easily broken, the glass would rock and fall down, so the quality of small accessory can't be ignored.
Our packaging is intact and strict, one piece of glass with 2 layers of bubble foam besides with foam around the glasses to avoid the glass damage.
Some factories's packaging is coarse and not strict, they use only a little of foam to save cost.The glass would be easily broken.
We have 2 professional QC, they are responsible and carefully for each unit of raw material and finished product to ensure the good qulity of product when customer received.
A factory without QC can not control the quality which will cause serious problem.
1) Requirements of Glass:
1. Tempered glass should be consistent with national safety CCC
standards and CE standards.
2. Impact resistance/Fragmented State should be required GB
15763.2-2005 of agreement.
3. Appearance requirements should to be met national safety
4. The Grain number of each 50 * 50mm area should to reach 45
Grains or more.
2) Requirements of apperance:
1. The Product frame decorative surface should no cracks, pitting,
bubbles and oxide film shedding
2. The Product frame decorative surface should no burrs, flaw.
3) Requirements of construction and assembly quality :
1. Each connecting piece should to be solid, no loose.
2. Accessory should no defect and must be fixed with products.
3.The hose and inlet should no leaks.
4. Each accessory should to be complied with the requirements of
environmental protection, no UV ozone and other hazardous substances.
You Might Also Like
- Tempered Glass Shower Panel for Bath Tub (K-793)
- Shower Column Rain Shower Set Shower Set (L-03) Made...
- Apollo Acrylic Apron with Air Bubble Bath Massage Ba...
- 400mm Width Wood Plastic Composite Interior Ceiling ...
- Luxury Steam Shower Room with Sauna Combination Stea...
- Safety Glass Shower Panel with Massage Jets (LT-B732)